pouring rate
英 [ˈpɔːrɪŋ reɪt]
美 [ˈpɔːrɪŋ reɪt]
网络 融熔金属倒入模穴中的速度; 浇注速率; 倒进模穴中的速度
双语例句
- First hydrate the lime, taking care, for the reaction is violent! Pouring the powder into the water, and not the contrary, makes it easier to control the rate.
首先，将石灰与水混合，反应十分激烈，操作时要小心！将粉末倒入水中，别搞反了。这样更容易控制反应的速率。 - Top pouring is the simplest and cheapest method, but gives poor control over the rate of pouring.
上注法最简单，成本最低，但不好控制浇注速度。 - As the results the automatic pouring rate of the sliding gate rises up to99% and the reoxidation of82B steel is greatly reduced.
并针对性地提出了解决措施，使浇铸82B钢的自动开浇率提高到99%，大大减少了82B钢的二次氧化。 - Oil pouring equation and its dispersing treatment for isothermal forging at constant strain rate
满足恒应变速率等温锻的注油方程及离散化处理 - In this study, hypoeutectic Al-Si alloys were solidified under various conditions to investigate the evolution of the morphology of primary phase by changing and controlling pouring temperature, cooling rate, and semi-solid isothermal holding time.
通过改变和控制浇注温度、冷却速度和半固态保温时间，研究了亚共晶AlSi合金在不同凝固条件下初生相形貌的演变。 - Effects of pouring temperature, vacuum rate and permeability of the coating layer on the components of thermal degraded products of EPS were investigated.
采用气相色谱法对负压消失模工艺型腔中EPS热解产物样品进行了分析，并且考察了合金浇注温度、负压度以及涂层透气性对热解产物组成的影响。 - The distributing of melt temperature in the rotational barrel is influenced by the interaction of pouring temperature and shear field of barrel, then the effective nucleation rate changes consequently, and the structure and dimension of primary particles change finally.
浇注温度和输送管转速通过交互作用影响合金熔体流经输送管时的温度分布，进而影响有效形核数目，最终影响初生相的形态和尺寸。 - The higher the pouring temperature or the larger the sprue hollow area rate is, the faster the filling velocity of molten aluminum is.
浇注温度越高、直浇道空心面积率越大，铝液充型速度越快。 - It was shown at pouring temperature, pouring rate and gravity coefficient influenced on the segregation of Al significantly, and the segregation would be eliminated efficiently as Mn or RE was added into the alloy.
结果表明，浇注温度、浇注速度和重力倍数对偏析有明显影响，加入锰和稀土能有效地抑制铝的偏析。 - Influence of several parameters, including pattern material, sample size, pouring temperature, coating thickness, sprue height and vacuum rate, on the fluidity of AZ91 Mg alloy by EPC-V is studied.
研究了镁合金负压消失模铸造中，模样材料、试样尺寸、浇注温度、涂料厚度、直浇道高度以及真空度等因素对AZ91镁合金流动性的影响。 - Therefore, a constant flow dumping quantitative automatic pouring system is developed to achieve die casting under constant flow rate.
针对于此，研发了一套恒流量倾倒式定量自动浇注系统，实现了恒流量定量浇注。 - The driving force of the hydraulic system, the pressure of the hydraulic circuit in the casting process and the pouring flow rate are measured and processed. The correctness of the mathematical model and the rationality of the control algorithm are verified.
对浇注过程中液压系统驱动力、液压回路的压力以及浇注流量进行测量与处理，验证了数学模型的正确性以及控制算法的合理性。